Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!hp-pcd!hpfcso!hpfcmgw!hpfcse!hpuerca!jns
From: jns@hpuerca.HP.COM (Jeff Squires)
Newsgroups: comp.sys.hp
Subject: Re: ?Configure SLIP for HP-UX
Message-ID: <1340018@hpuerca.HP.COM>
Date: 1 May 91 20:40:21 GMT
References: <1991Apr26.235823.8775@socrates.umd.edu>
Organization: Hewlett-Packard NARC -- Atlanta
Lines: 7

SLIP is supported and provided in HP-UX release 8.0 for the series 300 and
800 HP9000 computers. If you are on contractual support from HP, you will
receive this software, if you have LAN and ARPA support for the series 800
or you have purchased the HP-UX bundle (PE) for series 300 machines. I have
used it and it appears to work.

Hope this helps.......