Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!bionet!agate!darkstar!saturn.ucsc.edu
From: alvin@saturn.ucsc.edu (Alvin Jee)
Newsgroups: comp.sys.nsc.32k
Subject: 532 bug?
Message-ID: <15268@darkstar.ucsc.edu>
Date: 2 May 91 00:48:23 GMT
Sender: usenet@darkstar.ucsc.edu
Organization: University of California, Santa Cruz
Lines: 63

AHHHH!!!
   I've found somw interesting behaviour in my 532. It seems that the
   notb instruction is not doing it's thing. All I can get it to
   do is add one to my source operand. I've attached a copy of the
   output I get from the monitor.

   Oh, the first bsr gets a character from the serial port and puts it
   in r0. In this example, I've entered a space character.

   Any help and insight into this will be much appreciated!
	Alvin Jee
	alvin@spica.ucsc.edu

--------- This is the start of the whole thing -------

Command (? for help): dis 10000 8 
   10000        br      2
   10002        enter   [],0
   10005        bsr     48
   10008        notb    r0,r1
   1000b        bsr     130
   1000e        br      -12
   10010        exit    []
   10012        ret     0
Command (? for help): set bkpt0 10008
Command (? for help): run 10000
   10008        notb    r0,r1   (breakpoint)
Command (? for help): show
      r0=20             r1=0              r2=0              r3=0        
      r4=0              r5=0              r6=0              r7=0        
      f0=0              f1=0              f2=0              f3=0        
      f4=0              f5=0              f6=0              f7=0        
     l1l=0             l1h=0             l3l=0             l3h=0        
     l5l=0             l5h=0             l7l=0             l7h=0        
      pc=10008         usp=ffc           isp=bf8            fp=bf8      
      sb=0         intbase=40            mod=8             psr=ipsunzFvltc
     dcr=0             dsr=0             car=0             bpc=0        
     cfg=bf7          ptb0=0            ptb1=0            tear=0        
     mcr=0             msr=0             fsr=10000           .=10014    
      v1=0              v2=0           bkpt0=10008       bkpt1=0        
   bkpt2=0           bkpt3=0           bkpt4=0           bkpt5=0        
   bkpt6=0           bkpt7=0           radix=d'16        debug=d'0      
  scrlen=d'24     scsi_adr=1        scsi_lun=0        
Command (? for help): step
   1000b        bsr     130     (trace)
Command (? for help): show
      r0=20             r1=21             r2=0              r3=0        
      r4=0              r5=0              r6=0              r7=0        
      f0=0              f1=0              f2=0              f3=0        
      f4=0              f5=0              f6=0              f7=0        
     l1l=0             l1h=0             l3l=0             l3h=0        
     l5l=0             l5h=0             l7l=0             l7h=0        
      pc=1000b         usp=ffc           isp=bf8            fp=bf8      
      sb=0         intbase=40            mod=8             psr=ipsunzFvltc
     dcr=0             dsr=0             car=0             bpc=0        
     cfg=bf7          ptb0=0            ptb1=0            tear=0        
     mcr=0             msr=0             fsr=10000           .=10014    
      v1=0              v2=0           bkpt0=10008       bkpt1=0        
   bkpt2=0           bkpt3=0           bkpt4=0           bkpt5=0        
   bkpt6=0           bkpt7=0           radix=d'16        debug=d'0      
  scrlen=d'24     scsi_adr=1        scsi_lun=0        
Command (? for help): 
---------- Well, any ideas? ------------------------