Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!cs.utexas.edu!ut-emx!frank
From: frank@ut-emx.uucp (Frank Abernathy)
Newsgroups: comp.terminals
Subject: Re: What's wrong with a MIME2a terminal--Error code 3-A when power up
Summary: EPROM error
Message-ID: <48148@ut-emx.uucp>
Date: 30 Apr 91 13:39:48 GMT
References: <00947DB6.F2C08440@vms.csd.mu.edu>
Organization: The University of Texas at Austin; Austin, Texas
Lines: 15

In article <00947DB6.F2C08440@vms.csd.mu.edu>, 5716zhengy@vms.csd.mu.edu writes:
> Does any one out there know what's wrong with an error code 3-A at power
> up? The terminal is a Micro-term Mime2a used on a Vax. Thanks in advance.

The error codes for the MIME2A are as follows:


1        Display ram error
3-A      EPROM error location 000-7FF hex
3-B      EPROM error location 800-FFF hex

Microterm, (314)-343-6515.

later
frank