Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!uunet!wrkgrp!ets
From: ets@wrkgrp.COM (Edward T Spire)
Newsgroups: comp.unix.aix
Subject: Re: 3rd party disk/tape on RS/6000?
Message-ID: <1991May1.141433.228@wrkgrp.COM>
Date: 1 May 91 14:14:33 GMT
References: <1991Apr30.115308.1@atmo1.atmo.arizona.edu>
Organization: The Workstation Group
Lines: 18

In article <1991Apr30.115308.1@atmo1.atmo.arizona.edu> leuthold@atmo1.atmo.arizona.edu writes:
>I'm sure this has already been asked, but, I've just begun to read this group.
>Is it possible to attach 3rd party SCSI disks to a RS/6000? (Model 550)  How
>about Exabyte 8mm drives?  Thanks and sorry if this has been gone over before.
>(reply to email if you wish)

I put a 650 meg Wren 6 on a 320, absolutely no problem!  Got it from Workstations Plus,
415-351-2661.  Total cost $2,530, including special cable.

Now what I need is an affordable 1/4" tape drive.  My system came pre-loaded, and it's
time to upgrade to 3003, and I don't want to load 18 hours worth of diskettes...

========================================================================

Ed Spire                           email: ets@wrkgrp.com      (on uunet)
The Workstation Group              voice: 800-228-0255
6300 River Road, Suite 700            or  708-696-4800
Rosemont, Illinois  60018            fax: 708-696-2277