Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!zardoz.cpd.com!everex!jde
From: jde@everex.uucp (-Jeff Ellis())
Newsgroups: comp.unix.sysv386
Subject: Re: configuring FAS
Message-ID: <1991May2.165807.11783@everex.uucp>
Date: 2 May 91 16:58:07 GMT
References: <1991Apr28.040751.3453@unixland.uucp> <3PFQQ4G@geminix.in-berlin.de> <1991Apr29.214212.17923@unixland.uucp>
Organization: ESIX Computers, Inc.
Lines: 19

In article <1991Apr29.214212.17923@unixland.uucp> bill@unixland.uucp (Bill Heiser) writes:
>hmmm... When I login, and type 'stty -a', it shows '-hupcl'.
>
>Say, anyone out there running Esix with FAS 2.08 seen this? (carrier
>not dropping on logout on remote port, but instead coming back with
>a login: prompt?)
>

Nope.... BTW here is the gettydef entry I am using:

19200M# B19200 HUPCL OPOST ONLCR TAB3 BRKINT IXON IXANY ISTRIP ECHO ECHOE ECHOK ICANON ISIG CS8 CREAD # B19200 OPOST ONLCR TAB3 BRKINT IXON IXANY ISTRIP ECHO ECHOE ECHOK ICANON ISIG CS8 CREAD HUPCL #(For ESIX BBS System Type bbs ) login: #19200M

I hope this may help (BTW this is a 8 bit login!), I am using the default
FAS 2.08 setup using minor #80 for ttyF00 and 208 for ttyFM00.
 
-- 
Jeff Ellis		ESIX SYSTEM/V  
                        UUCP:uunet!zardoz!everex!jde
                        Internet: ICS.UCI.EDU!zardoz.uucp!everex!jde