Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!wuarchive!uunet!olivea!tymix!opus!gregk
From: gregk@opus.uucp (Greg Kennedy)
Newsgroups: comp.periphs.scsi
Subject: Disk drive enclosures
Message-ID: <386@tymix.Tymnet.COM>
Date: 6 May 91 18:21:52 GMT
Sender: usenet@tymix.Tymnet.COM
Reply-To: gregk@opus.UUCP (Greg Kennedy)
Distribution: comp.periphs.scsi
Organization: BT Tymnet, Inc. / San Jose, CA
Lines: 26
Nntp-Posting-Host: opus


   I have designed a SCSI controller board to interface to our
   Engine product line.  It is working just fine, thank you.
   That was the easy part.

   I am looking for cabinets that I can put my SCSI drives in.
   The cabinets must contain a power supply that has UL, CSA, 
   VDE and TUV approvals.  The cabinet must be certified to
   pass the FCC emmisions testing standards.

   I need a single 5 1/4 drive enclosure, adaptable to 3 1/2
   inch drives, and a dual drive enclosure, same as above.  the
   cabinets should contain a 50 pin D connector, a SCSI-2 connector,
   or have a knockout for one of these types.

   The cabinets need to be aesthetically pleasing as they will
   be placed in a marketing brochure for the world to see.

   Everything I have looked at so far does not have the proper
   agency approvals.  Can anyone point me to some vendors?

   Please E-mail replies to me.

   Thank you,

   Greg Kennedy