Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!sdd.hp.com!spool.mu.edu!uunet!munnari.oz.au!uniwa!csuvax1!sorensen
From: sorensen@csuvax1.csu.murdoch.edu.au (Peter Sorensen)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: POPmail problems
Message-ID: <1991May7.011336.16783@csuvax1.csu.murdoch.edu.au>
Date: 7 May 91 01:13:36 GMT
References: <1991May7.093920.6641@csv.viccol.edu.au>
Organization: Murdoch University
Lines: 17

gjocc@csv.viccol.edu.au writes:
> I have failed to get POPmail 2.03 to work on two PCs.
> (popmail from boombox.micro.umn.edu)
> 1. 10Mhz XT clone with a WD8003E card with 7.x packet driver.
>    I get TCP driver did not load. ...
> 2. 25Mhz AST 386 with NI5210 card with 7.x packet driver.
>    The machine just hangs after the configuration is entered.
>   Both machines work perfectly with NCSA telnet via the packet drivers.
>   I must be missing something obvious, there is no other software
>   involved just the packet drivers and POPmail.
>   Can anyone help?
Have you set up netdev.sys with custom.exe?
-- 
Peter Sorensen                 sorensen@csuvax1.murdoch.edu.au
Murdoch University
South Street
Murdoch, W.A. 6150, Australia.