Path: utzoo!utgpu!watserv1!watmath!att!linac!uwm.edu!cs.utexas.edu!uunet!munnari.oz.au!brolga!bunyip.cc.uq.oz.au!zeus!ibell
From: ibell@zeus.usq.EDU.AU (ibell rod)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: WinQVT/Net & NDIS & Packet driver
Message-ID: <ibell.673713584@zeus>
Date: 8 May 91 14:39:44 GMT
References: <.673537186@dutepp1> <1991May7.004506.25622@netcom.COM>
Lines: 36

jbreeden@netcom.COM (John Breeden) writes:


>Get the latest, greatest dis_pkt (version 1.06), it'll cure the problem 
>- the following should help:

I tried this.  It almost works! I think.

I have 3Com LAN Manager 1.1 running and have managed to get QVTnet1.6 running
with the protocol manager by using a second interface and seperate packet
driver. It works OK but extra expense etc.

I tried DIS_PKT.GUP 1.1.  NO GO I got the same TYPE_IN_USE etc messages.

With DIS_PKT.DOS 1.06 as John recommended, I now get the console window,
but any attempt to open a session results in:
	
	Unable to Open Session [-2]
	Unable to Open New Session
	Local host or gateway not Responding

Hardware is 3Com EtherlinkII


Any thoughts!!

------------------------------------------
Rod Ibell
Communications CSU
University College of Southern Queensland
Toowoomba
Australia.

ibell@zeus.usq.edu.au

**********************************************************************