Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!uunet!timbuk!paws
From: paws@cray.com (Daniel Baehr)
Newsgroups: comp.sys.amiga.hardware
Subject: Question for GVP HC/+8 users......
Keywords: What are your SCSI addresses set to??
Message-ID: <074938.3917@timbuk.cray.com>
Date: 6 May 91 15:02:57 GMT
Lines: 19



  A question for all of you GVP HC/+8 users out there that have
 gotten a drive other than a Quantum to work with it. What are the
 SCSI address of your controller card and the HD? There ARE SCSI
 ID jumpers on the card and mine have no jumpers on them. The Engingeer
 from GVP said that it wasn't used/not supported at this time but I've
 heard that one too many times to believe it ( and found the opposite was
 true). I was tring to connect a CDC/Seagate ST1239N drive to it and 
 it keeps giving me a "Sense Key 4, error code 45" error. Sense Key 4
 says the drive detected a controller failure or hardware error of some kind
 and Error Code 45 is selection/reselection error. NO, IT"S NOT THE DRIVE!
 the TrumpCard Professional works like a dream!! I have more gorry details
 about this problem and the C*** I went thru with GVP on this problem. If
 you are interested I'll post'em. Oh, don't forget my original question 
 about the SCSI ID jumpers. Thanks.......


  Daniel Baehr   paws@sequoia.cray.com