Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!zaphod.mps.ohio-state.edu!wuarchive!udel!mmdf
From: Gelson Dias Santos <GELSON%SBU.UFRGS.ANRS.BR@uicvm.uic.edu>
Newsgroups: comp.sys.amiga.hardware
Subject: Need help to use a Chinon FZ354 drive as an external drive.
Message-ID: <53045@nigel.ee.udel.edu>
Date: 8 May 91 20:41:17 GMT
Sender: mmdf@ee.udel.edu
Lines: 27


   I need some advice from peoples who are using a Chinon FZ 354 drive as an
amiga drive. I want to add one as an external drive to my A500. I tried to
replace my internal drive by the Chinon, and it worked,but without disk change.
I think I have to configure the driver's jumpers properly. What is the correct
configuration? The jumpers I found on the back of the drive are:

   DS2... ....DS3
        . .   ....MD
        . .   .  ....RDY
        . .   .  .
       o-o-o o-o o o
             !   ! !...TTL/CMOS
       o-o-o o o-o o
        . .  .  .
        . .  .  ...DC
        . .  ....MM
   DS1... ....DS0

   The default configuration who came in the drive are DS1,MM,DC,TTL.
   If someone could give me an explanation about each one, I would be very
 happy.

* Gelson Dias Santos  *  Bitnet/Internet: GELSON@SBU.UFRGS.ANRS.BR  *
* Porto Alegre - RS   *  Sorry, english is not my native language!  *
*       BRAZIL        *           (Alguem fala portugues?)          *