Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!dali.cs.montana.edu!uakari.primate.wisc.edu!caen!uwm.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!dat33228
From: dat33228@uxa.cso.uiuc.edu (Derek A. Taubert)
Newsgroups: comp.sys.apple2
Subject: Re: GS Telnet
Message-ID: <1991May7.061357.26744@ux1.cso.uiuc.edu>
Date: 7 May 91 06:13:57 GMT
References: <694@generic.UUCP>
Sender: usenet@ux1.cso.uiuc.edu (News)
Organization: University of Illinois at Urbana
Lines: 26

In article <694@generic.UUCP> marekp@pnet91.cts.com (Marek Pawlowski) writes:
>There isn't much involved in getting telnet written for the GS.  All you need
>to write is either TCP/IP or SL/IP (depending on the connection type), and use
>telnet through that.  Easy project, I can get on it when I get my GS

HA!  Sure...  Well, I'll just say that it is not going to be easy.  Period.

I've taken a look at the NCSA code (my roomie is now working for them!!) and it
is going to take a lot of work.  I'm in a good position to do it this summer
if I can get ahold of:

1) Time away from my NeXT programming -- consulting job pays good money!
2) Gator box to go between NeXT and IIgs -- and try to fake some TCP/IP stuff
   with the NeXT.

Other than that, I've got the whole summer and nothing else to do but program,
and program, and program, and program....



--
+ Derek Taubert --> derek@mrcnext.cso.uiuc.edu + Author of : GScii+	      +
+		    dat33228@uxa.cso.uiuc.edu  + and the world's most useless +
++++++++++++++++++++++++++++++++++++++++++++++++ desk accessory -> Amaze me   +
+ There are MOUSE technotes?    +  *******8-)  ++++++++++++++++++++++++++++++++
+ Ask me about my GS load meter +  ^^^^^^^^^^ Marge Simpson                   +