Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!dali.cs.montana.edu!uakari.primate.wisc.edu!crdgw1!gecrdvm1!rankins
From: RANKINS@gecrdvm1.crd.ge.com
Newsgroups: comp.sys.apple2
Subject: Re: What's wrong with my hard drive
Message-ID: <91127.122707RANKINS@GECRDVM1.BITNET>
Date: 7 May 91 16:27:07 GMT
References: <1991May4.015842.11339@utstat.uucp> <48477@ut-emx.uucp>
 <52478@apple.Apple.COM> <1991May6.010943.5215@utstat.uucp>
 <1991May6.052835.2640@nntp-server.caltech.edu>
Organization: General Electric Corporate Research & Development
Lines: 6

I have a Rev C SCSI card and a drive case with a hard drive and a tape
drive in it.  The tape drive is at the end of the chain and internally terminat
terminated.  From what you are saying, the cable should be terminated
at the SCSI card end as well?  Where would I find such a terminator (25 pin
male on one side, 25 pin female on the other so it could go between the
card connector and the cable)?