Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!crdgw1!uunet!mcrware!mwca!bill
From: bill@mwca.UUCP (Bill Sheppard)
Newsgroups: comp.sys.atari.8bit
Subject: Re: Real Atari history
Message-ID: <1854@mwca.UUCP>
Date: 6 May 91 18:06:22 GMT
References: <1991May3.070356.21318@sactoh0.sac.ca.us> <41991@cup.portal.com>
Organization: Microware Systems Corp., Santa Clara, CA
Lines: 17

In article <41991@cup.portal.com> Bob_BobR_Retelle@cup.portal.com writes:
->Mark Newton John writes:
...
->>Almost all peripherals worked, except it's pretty hard to do any
->>programming with DOS loaded in the computer.

->Actually, ALL the peripherals worked, since the 400 and 800 were identical..
->with the 32K (or 48K) board installed, there was no problem doing useful
->programming..

Well, except that with the keyboard of the 400 there is a _big_ problem
programming - mashed fingertips! :>)
-- 
 ##############################################################################
 # Bill Sheppard  --  bills@microware.com  --  {uunet,sun}!mcrware!mwca!bill  #
 # Microware Systems Corporation  ---  OS-9: Seven generations beyond OS/2!!  #
 ######Opinions expressed are my own, though you'd be wise to adopt them!######