Xref: utzoo comp.sys.dec:5704 comp.sys.ibm.pc:55098
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!news.larc.nasa.gov!mris.larc.nasa.gov!jka
From: jka@mris.larc.nasa.gov (J. Keith Alston)
Newsgroups: comp.sys.dec,comp.sys.ibm.pc
Subject: DEC lj250 on PC serial port
Message-ID: <1991May6.173629.6184@news.larc.nasa.gov>
Date: 6 May 91 17:36:29 GMT
Sender: news@news.larc.nasa.gov (USENET Network News)
Distribution: na
Organization: NASA Langley Research Center, Hampton, VA  USA
Lines: 12
Originator: jka@mris.larc.nasa.gov


 greetings,
      I have a DEC lj250 ink jet printer, that I would like to connect
   to a PC. I've attempted to connect it to a serial port, set it in
   the PCL mode and then send a PCL file to it, but nothing happens.
   If anyone out there has done this or has any ideas, I'd appreciate
   hearing from you. I'll try to keep up with this group but I would
   like E-mail if possible.
-- 
"In this world you must be OH so smart or OH so pleasant...
			 I recommend pleasant"----> Elwood P. Dowd
Lockheed Eng. and Sci. Co./Nasa Larc|J. Keith Alston jka@snow.larc.nasa.gov