Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!snorkelwacker.mit.edu!apple!agate!usenet.ins.cwru.edu!gatech!prism!kt4
From: kt4@prism.gatech.EDU (Ken Thompson)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Connor 3104 drive jumpers
Message-ID: <28348@hydra.gatech.EDU>
Date: 7 May 91 13:33:14 GMT
Organization: Georgia Institute of Technology
Lines: 31




	I am trying to install a 2nd connor 3104 100 MB IDE hard disk on my 
386 machine. Unfortunately I do not have documentation on the drive
jumpers. The drive has 4 jumpers labelled as follows:

	___
        HSP
	_
	C/D   - this is drive select

	___
        DSP

	ACT

I have gotten the host adapter to recognize that drive d: is on the bus and
attempt to access it but it does not work. I checked out the drive and it 
works as c:. According to my host adapter docs, nothing needs to be changed
on it. Any info would be appreciated. Please reply directly.

		Thanks,

			Ken

-- 
Ken Thompson  GTRI, Ga. Tech, Atlanta Ga. 30332 Internet:!kt4@prism.gatech.edu
uucp:...!{allegra,amd,hplabs,ut-ngp}!gatech!prism!kt4
"Rowe's Rule: The odds are five to six that the light at the end of the
tunnel is the headlight of an oncoming train."       -- Paul Dickson