Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!sdd.hp.com!caen!dali.cs.montana.edu!milton!sumax!halcyon!ralphs
From: halcyon!ralphs@seattleu.edu (Ralph Sims)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Re: Connor 3104 drive jumpers
Message-ID: <uLBL23w164w@halcyon.uucp>
Date: 7 May 91 18:52:17 GMT
References: <28348@hydra.gatech.EDU>
Organization: The 23:00 News and Mail Service
Lines: 27

kt4@prism.gatech.EDU (Ken Thompson) writes:

> 	___
>         HSP
> 	_
> 	C/D   - this is drive select
> 
> 	___
>         DSP
> 
> 	ACT

> I have gotten the host adapter to recognize that drive d: is on the bus and
> attempt to access it but it does not work. I checked out the drive and it 
> works as c:. According to my host adapter docs, nothing needs to be changed
> on it. Any info would be appreciated. Please reply directly.

To set up as Drive 0, jumper HSP, CD, and DSP (ACT is for the LED, I think).
Then set the second drive with NO jumpers.  The first action enables the
Conner as a master drive and the second as a slave.  You're on your own to
get the LED thing right.  It appears that the first partition on the second
drive will become D, with the rest following the last partition on the first
drive.

--
          Of all the things I've lost, I miss my mind the most.
                       halcyon!ralphs@seattleu.edu