Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!samsung!uunet!lanai!ron
From: ron@Eyring.COM (Ron Holt)
Newsgroups: comp.sys.m88k
Subject: Re: XR4
Keywords: porting XR4
Message-ID: <1991May7.145924.27169@Eyring.COM>
Date: 7 May 91 14:59:24 GMT
References: <1991May06.131245.4639@cv.ruu.nl>
Distribution: comp.sys.m88k
Organization: Eyring, Inc.
Lines: 18

In article <1991May06.131245.4639@cv.ruu.nl> emiel@cv.ruu.nl (Emiel Polman) writes:
>I am porting X11R4 from MIT on a Tektronix 88/10 machine.
>Compiling the source gives no errors, but the xterm program
>gives me IO errors.
>Is there someone who had the same experience ?
>the config file I use is the m4800.cf.
>
>		Emiel Polman

Check the file mit/lib/X/XlibInt.c.  88k systems compliant with the
Binary Compatibility Standard Networking Supplement will return EAGAIN
instead of EWOULDBLOCK on reads or writes to sockets if the data can't
be immediately transferred.  I believe this was the only significant
change I had to make the first time I ported X to Sanyo/Icon's 88k
machine (a very fine 88k box BTW).
-- 
Ron Holt	ron@Eyring.COM  uunet!lanai!ron
Eyring Inc.	+1 801-375-2434 x434