Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!cs.utexas.edu!uunet!zephyr.ens.tek.com!tektronix!reed!glacier!busker!f31.n343.z1.FIDONET.ORG!Rick.Fallstrom
From: Rick.Fallstrom@f31.n343.z1.FIDONET.ORG (Rick Fallstrom)
Newsgroups: comp.sys.mac.wanted
Subject: RE: HELP!  SE won't boot!!!
Message-ID: <459.2821FC53@busker.fidonet.org>
Date: 4 May 91 05:39:21 GMT
Sender: ufgate@busker.fidonet.org (newsout1.26)
Organization: FidoNet node 1:343/31
Lines: 19

Something you will have to do is take and reload your System files to the  the
hard drive.  However, something you might try first is using Silverlining (off
of a bootable floppy of course) to reinstall the hard disk driver software.
This would only be necessary if you couldn't read the hard drive, but since
you can, use your system tools disk set to reload the system useing the custom
install option and then the system software for SE.  This will get you back
to booting from the hard drive.

BTW, you did wipeout some of the System when you shut off in the middle of a
reboot.

     Rick Fallstrom
     (206)871-0873 (home)


--  
Rick Fallstrom - via FidoNet node 1:105/14
    UUCP: ...!{uunet, reed}!glacier!busker!343!31!Rick.Fallstrom
INTERNET: Rick.Fallstrom@f31.n343.z1.FIDONET.ORG