Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!malgudi!caen!umich!vela!m.cs.uiuc.edu!wuarchive!decwrl!nnews!uunet!bjudev!ppascoe
From: ppascoe@bjudev.UUCP (Phillip Pascoe)
Newsgroups: comp.sys.novell
Subject: Netware 3.11 TCP/IP Routing problems
Message-ID: <1991May6.124358.18073@bjudev.UUCP>
Date: 6 May 91 12:43:58 GMT
Distribution: bjudev
Organization: Bob Jones University
Lines: 50

Hello,
	I recently received Netware 386 3.11 and am having difficulties in
getting it to pass IP packets even after reading the TCP/IP supervisor's
guide.  I have been using FTP Software's PC/TCP product along with the
NE1000 packet driver interface to work with a UNIX box located on the same
network as the Novell file server and both coexisted fine.  I set the 3.11
software up on a temporary machine to learn about it before putting it in
production.  My setup looks like this logically:
    3.11 server
    A NE2000 ip=192.88.127.50
    B NE2000 ip=192.88.127.51

    On side A
      UNIX host ip=192.88.127.1
      PC WS 1   ip=192.88.127.3

    On side B
      PC WS 2   ip=192.88.127.52
      PC WS 3   ip=192.88.127.53

    My AUTOEXEC.NCF looks like this:

file server name TEST
ipx internal net 850
load NE2000 port=300 int=2 frame=ETHERNET_802.3 
bind IPX to NE2000 net=999
load NE2000 port=320 int=3 frame=ETHERNET_802.3 
bind IPX to NE2000 port=320 int=3 frame=ETHERNET_802.3 net=851
load NE2000 port=300 int=2 frame=ethernet_ii name=ip2000 
load NE2000 port=320 int=3 frame=ethernet_ii name=ip2001 
load tcpip forward=yes rip=yes
bind ip to ip2000 addr=192.88.127.50
bind ip to ip2001 addr=192.88.127.51
mount all

The problem is that no IP packets are getting from side A to side B, I can
PING from PC WS 2 to 192.88.127.51 but not to 192.88.127.50 (ARP fails).  I
can PING from PC WS 1 to 192.88.127.50 but not to 192.88.127.51.  I can
PING from PC WS 1 to UNIX host, but PC WS 3 cannot.  I feel that the IP
router in 3.11 is not routing the IP packets.  I have tried various
combinations of the load parameters for the TCPIP.NLM and for BIND to no
avail.  I used the example network files found in /etc/examples and removed
the internet example names that did not apply.  What part of the manual did
I miss?  Any thoughts would be greatly appreciated.  Please email
responses.  Thanks.
-- 
-----------------------------------------------------------------------------
 Phillip Pascoe 	Bob Jones University		Greenville, SC 
 uunet!bjudev!ppascoe 					Opinions are my own.
-----------------------------------------------------------------------------