Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!dali.cs.montana.edu!ogicse!intelhf!endeavor!flight!racsys2!mike
From: mike@racsys2.UUCP (Mike Newman)
Newsgroups: comp.sys.novell
Subject: Re: Windows/DOS/Novell incongruity
Summary: I haven't seen the same problem you describe, but I have an idea
	 that you could try.
Message-ID: <249@racsys2.UUCP>
Date: 5 May 91 11:08:30 GMT
References: <1314@intelisc.isc.intel.com>
Organization: Rachor Data Center Beaverton, OR
Lines: 15


This may not help at all, but there is a potential conflict in the
hardware of the three workstations you're having trouble with.
You mentioned that the network cards are set for interrupt 2, which
is used by some EGA and VGA cards. You might try setting the network
card for interrupt 3 if you don't need COM2: or interrupt 5 if you
don't need LPT2:. Don't forget to change the workstation shell to
reflect the interrupt change.

                        Mike


-- 
Mike Newman
Aloha, Oregon           UUCP: racsys2!delos!mike@flight.hf.intel.com