Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!uwm.edu!csd4.csd.uwm.edu!peter
From: peter@csd4.csd.uwm.edu (Peter J Diaz de Leon)
Newsgroups: comp.dcom.modems
Subject: T1600 and UUCP
Message-ID: <12065@uwm.edu>
Date: 11 May 91 17:15:21 GMT
Sender: news@uwm.edu
Distribution: usa
Organization: University of Wisconsin - Milwaukee
Lines: 27
Originator: peter@csd4.csd.uwm.edu


We are trying to get a Telebit T1600 modem running
UUCP under ATT SYSV 3.2.1

We have UUGETTY running on the modem port.
The T1600 in set up for UUCP SYS V HDB using
the pre-stored configuration in the T1600.

The modem is running off of an ATT ports board with
hardware flow control.

However after a UUCP transfer that goes perfect
the lock file in /usr/spool/locks is not removed.
If we remove it, it just reappears over and over.

Any ideas????


		Thanks

==============================================================================
University of Wisconsin - Milwaukee             USMAIL:  Peter J. Diaz de Leon
Computer Science Department                              7411 W. Warnimont Ave
                                                         Milwaukee, WI. 53220
ARPA: peter@cvax.cs.uwm.edu

==============================================================================