Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!apple!netcomsv!gandrews
From: gandrews@netcom.COM (Greg Andrews)
Newsgroups: comp.dcom.modems
Subject: Re: T1600 and UUCP
Summary: Which lock file is it?
Message-ID: <1991May11.172503.5195@netcom.COM>
Date: 11 May 91 17:25:03 GMT
References: <12065@uwm.edu>
Sender: netnews@netcom.COM (USENET Administration)
Distribution: usa
Organization: Netcom - Online Communication Services  UNIX System {408 241-9760 guest}
Lines: 30

In article <12065@uwm.edu> peter@csd4.csd.uwm.edu (Peter J Diaz de Leon) writes:
>
>We are trying to get a Telebit T1600 modem running
>UUCP under ATT SYSV 3.2.1
>
>However after a UUCP transfer that goes perfect
>the lock file in /usr/spool/locks is not removed.
>If we remove it, it just reappears over and over.
>
>Any ideas????
>

What lock file is it?  The lock file for the port, or the lock file for
the other computer?

If it's for the port, then make sure that:  (a) The modem is hanging up
the phone line (not staying connected after DTR turns off), and (b) The
modem's &Cx setting is not being changed by the dial-out chat script.

A setting of &C1 is recommended over the &C2 that the pre-stored config
uses.

>University of Wisconsin - Milwaukee             USMAIL:  Peter J. Diaz de Leon


-- 
 .------------------------------------------------------------------------.
 |  Greg Andrews   |       UUCP: {apple,amdahl,claris}!netcom!gandrews    |
 |                 |   Internet: gandrews@netcom.COM                      |
 `------------------------------------------------------------------------'