Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!uwm.edu!csd4.csd.uwm.edu!peter
From: peter@csd4.csd.uwm.edu (Peter J Diaz de Leon)
Newsgroups: comp.dcom.modems
Subject: Re: T1600 and UUCP
Message-ID: <12075@uwm.edu>
Date: 11 May 91 20:21:33 GMT
Sender: news@uwm.edu
Distribution: usa
Organization: University of Wisconsin - Milwaukee
Lines: 26
Originator: peter@csd4.csd.uwm.edu

>
>What lock file is it?  The lock file for the port, or the lock file for
>the other computer?
>
>If it's for the port, then make sure that:  (a) The modem is hanging up
>the phone line (not staying connected after DTR turns off), and (b) The
>modem's &Cx setting is not being changed by the dial-out chat script.
>
>A setting of &C1 is recommended over the &C2 that the pre-stored config
>uses.
>

    Forgot to say that the modem is hanging up with no problem.
    The uucico get terminated and the uugetty starts up like
    it is supposed to do at the end of a uucp transfer.
    I checked all the possible log files and everyone says
    that transfer was succesful.

			-Peter

==============================================================================
University of Wisconsin - Milwaukee             USMAIL:  Peter J. Diaz de Leon
Computer Science Department                              7411 W. Warnimont Ave
                                                         Milwaukee, WI. 53220
ARPA: peter@cvax.cs.uwm.edu 
==============================================================================