Newsgroups: comp.dcom.sys.cisco Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!news.cs.indiana.edu!cica!ogre!ssw From: ssw@ogre.cica.indiana.edu (Steve Wallace) Subject: Re: Cisco AGS+s and Cabletron FOTs Message-ID: Sender: news@cica.indiana.edu (News System) Nntp-Posting-Host: ogre.cica.indiana.edu Organization: Indiana University References: <1991May09.144306.3930@shl.com> <1475@nih-csl.nih.gov> Date: 13 May 91 23:14:09 GMT In <1475@nih-csl.nih.gov> kabara@alw.nih.gov (Joe Kabara) writes: >you can use the Cabletron FOTs back-to-back, you just need to put a repeater >between the tap on your etherent and the FOT you try to hook up to this. These FOTs also work back-to-back to another DTE device, like a router. We connection ciscos to ciscos and the combo works well. When we are trying to connect a remote ethernet to a cisco via fiber, we use the DEC fiber optic repeater at the far end. It works just fine in with the cabletron FOT. -- ==================================================================== Steven Wallace | wallaces@ucs.indiana.edu (internet) Manager Network Operations | wallaces@iubacs (bitnet) Indiana University | (812) 855 - 0960 (voice) ====================================================================