Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!csn!pikes!mercury.cair.du.edu!mnemosyne.cs.du.edu!isis.cs.du.edu!jhensley
From: jhensley@isis.cs.du.edu (John 'Hawg' Hensley)
Newsgroups: comp.os.minix
Subject: Thanks, but make still doesn't work!
Message-ID: <1991May10.035457.12570@mnemosyne.cs.du.edu>
Date: 10 May 91 03:54:57 GMT
Sender: usenet@mnemosyne.cs.du.edu (netnews admin account)
Reply-To: jhensley@isis.cs.du.edu (John 'Hawg' Hensley)
Organization: Nyx, Public Access Unix (sponsored by U. of Denver Math/CS dept.)
Lines: 18
Disclaimer1: Nyx is a public access Unix system run by the University of
Disclaimer2: Denver for the Denver community.  The University has neither
Disclaimer3: control over nor responsibility for the opinions of users.


First off, thanks to everyone who responded to my first barrage of
questions. 

BUT... I tried chmem'ing make to just about every conceivable size, with
no luck at all. It still gives an error 32512 on everything I try. If
I could just find out what that means, it'd probably be easy to fix, but
I can't find any references to it. If anyone has a clue, I'd greatly
appreciate it. If nothing else, I suppose I could try reinstalling
everything, but that seems a little extreme, as I haven't changed much 
from the stock 1.5, and don't see how it would help.

Here's what I have: 1.5 out of the box, running on a 640K XT with a 32M
hard disk, with the Clam shell added. My root image is on the HD, leaving
484K free at boot time (I haven't checked to see how much Clam takes up,
but it still doesn't work just using sh.). 

John