Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!mcsun!ukc!axion!tharr!zebedee!geoffc
From: geoffc@zebedee%tharr.uucp (Geoffrey Coan)
Newsgroups: comp.os.minix
Subject: Getting c68 to work on ST minix 1.5.10.3
Message-ID: <2130022@zebedee%tharr.uucp>
Date: 11 May 91 16:08:12 GMT
Reply-To: geoffc.zebedee@tharr.uucp
Organization: Geoffrey Coan (disorganisation)
Lines: 39
X-Version: Rodney's UUCP modules 02/11/90 V1.18

I tried sending this to CvW but it disappeared into the newsnet ether so can
anyone else help .... ?

I've been recently trying to install c68 v3 under minix ST 1.5.10.3 and I'm 
having some problems.

I unpacked the c68 v3 sources and patches 1 & 2 and applied them all OK.
I also unpacked the makefile.uue supplied with patch 2 and I did 'make ack'
to make the version of c68 to run with the ack libraries and linker (I think
this bit was right ...).

The make went OK and I ended up with a c68 module OK which I then tried to
use as in:

/usr/lib/cpp file.c >file.i
c68 file.i file.s
.. etc

the resultant file.s was empty and only contained the bss, data, text, etc
section labels.  One article on comp.os.minix earlier suggested adding
-DICODE to the make - I did this and when running c68 with -Qicode I just
got an empty icode file.

I compiled the new cc.c under ack but whenever I run it I get 'internal
error' (either ack or c68 mode) - I don't know about this one either !

Finally, I have all the lib68k and liback .s files - what do I do with them ?
I presume that they go to make up some sort of new library (is this libc68.a ?)
or am I even more off track.

Help !

Thanks, Geoffrey Coan
--
-------------------------------------------------------------------------------
are you ready to SKYDIVE ??                                       Geoffrey Coan
well all right then, if you say so ...        ..!ukc!axion!tharr!zebedee!geoffc

<- UUCP'd from my ST via tharr; *free* UK public access to Usenet 0234 720202 ->