Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!sdd.hp.com!samsung!uunet!bu.edu!transfer!lectroid!sw.stratus.com!tespy
From: tespy@sw.stratus.com (Tony Espy)
Newsgroups: comp.protocols.ibm
Subject: Re: 3x74 EMULATION using PC?
Keywords: synchronous,3270,protocol conversion
Message-ID: <5489@lectroid.sw.stratus.com>
Date: 10 May 91 12:47:18 GMT
References: <1991May7.225452.26662@cbfsb.att.com>
Sender: usenet@lectroid.sw.stratus.com
Distribution: usa
Organization: Stratus Computer, Inc.
Lines: 23

In article <1991May7.225452.26662@cbfsb.att.com>, jjm@cbnewsb.cb.att.com (james.j.menth) writes:
> 
> Apologies for first posting related errors.
> 
> I have an imminent need for a ibm-pc(clone) package that will emulate
> a very specific part of an SNA network.  I am trying to provide
> a single terminal and printer on a multi-drop SNA line (SDLC) without
> dropping a controller (3x74 type - in this case AT&T 6544) and a
> terminal and printer (327x type and 3286 type respectively - in
> this case AT&T 6579 and AT&T 577).  
		.
		.
		.

   You should be able to get an SDLC card from IBM.  As for the  
   3270 emulation, IBM also sells a PC 3270 Emulation pckg, you 
   can also try DCA ( makers of the IRMA board ).

						.
					/tony . . .
						.

	"Jazz isn't dead, it just smells funny." - Zappa