Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!olivea!samsung!think.com!sdd.hp.com!mips!pacbell.com!att!ucbvax!TNTECH.BITNET!RDC
From: RDC@TNTECH.BITNET (Only on Amiga!)
Newsgroups: comp.sys.amiga.hardware
Subject: Help me with ADSPEED!
Message-ID: <15E6458420E0283E@TNTECH.BITNET>
Date: 9 May 91 04:36:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Lines: 21


        I need help with my new ADSPEED!
The problem is an imediate visit from Mr. Guru when I run the adspeed program.
System:  Amiga 500 Rev Five GVP Series One with 4Meg RAM 80 meg Quantum
         Microbotics A501 clone.
        New AdSpeed CPU installed.
If I unplug the hard drive from the expasion slot on the A500 side,
I can run the AdSpeed program on change to 14Mhz.
I have AdSpeed set by the AB jumper to boot be default to the standard
speed 7.??Mhz.
I put a wait 2 secs command in my startup sequence did a control d
to break the initial CLI and ran adspeed then.  No luck.
Any help would be appreciated.  I will be calling ICD tech assistance ASAP.

Please send mail direct or copy to list a me too to the bitnet address
below.

Thanks.
Rick Cumby

Bitnet address:   rdc@tntech.bitnet