Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!munnari.oz.au!bruce!trlluna!rhea!aduncan
From: aduncan@rhea.trl.OZ.AU (Allan Duncan)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: A2000 AUTOCONFIG (HELP)
Message-ID: <3477@trlluna.trl.oz>
Date: 12 May 91 22:17:40 GMT
References: <21385@cbmvax.commodore.com>
Sender: news@trlluna.trl.oz
Lines: 20

From article <21385@cbmvax.commodore.com>, by daveh@cbmvax.commodore.com (Dave Haynie):
...
> If you copied that DBOE equation verbatim, your problem was that the read
> term (second and term) was looking for SHUTUP asserted rather than negated,
> so you never turned data buffers on for reads.  That's why I recommend really
> learning these equations; it would be an obvious problem if you looked it
> over very carefully.  I realize that it's often hard to trust your judgement
> over that of some authoritative reference.  But even authoritative references
> ain't perfect.

Any other annotations in your copy of the Tech. Ref. Man.?

Given the flow of information to this country, I'm sure it will help our
few remaining isolated hardware developers.  (I'm sure one acquaintance
will have banged his head on this one).

Allan Duncan	ACSnet	 a.duncan@trl.oz
(+613) 541 6708	Internet a.duncan@trl.oz.au
		UUCP	 {uunet,hplabs,ukc}!munnari!trl.oz.au!a.duncan
Telecom Research Labs, PO Box 249, Clayton, Victoria, 3168, Australia.