Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!caen!uflorida!gatech!hubcap!ncrcae!ncr-sd!sagpd1!monty
From: monty@sagpd1
Newsgroups: comp.sys.amiga.marketplace
Subject: Re: Educational Prices
Message-ID: <1991May8.150404.7486@sagpd1>
Date: 8 May 91 15:04:04 GMT
References: <285@nos850.UUCP> <1991May4.195627.4389@cunixf.cc.columbia.edu> <91124.202253DXB132@psuvm.psu.edu> <1991May5.014745.5260@cunixf.cc.columbia.edu> <1991May6.212610.8838@mnemosyne.cs.du.edu> <812@tnc.UUCP>
Reply-To: monty@sagpd1.UUCP (Monty Saine)
Organization: Scientific Atlanta, Government Products Div, San Diego, CA
Lines: 22

In article <812@tnc.UUCP> m0154@tnc.UUCP (GUY GARNETT) writes:
>
>The A2500/30 costs more than an A3000 because you can drop a toaster
>into the 2500.  If you want 68030 horsepower for lightwave,
>toasterpaint, or just running the toaster, then C= will make you pay
>for it.

	Woa... Wait a minute bucko... The A2500/030 COST MORE TO PRODUCE..
	so therefore sells for more. ...NEWTEK.... made a conscious decision
	to make thier board only fit into the A2000 as they need the room 
	for the layout! ...NEWTEK... is the one making you buy the more
	expensive form factor because they could not design the toaster to
	the specs of the machine that they were building it for.

	Do you see the trend here... NEWTEK..... not Commodore made the toaster
	A2000 only compatible. Flame NEWTEK not C=.

	Monty Saine
>
>The A2500 is probably a more expensive machine to manufacture, too.
>
>Wildstar