Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!tut.cis.ohio-state.edu!rutgers!cbmvax!drysdale
From: drysdale@cbmvax.commodore.com (Scott Drysdale)
Newsgroups: comp.sys.amiga.misc
Subject: Re: A3000 and Bridgeboard Add-Ons (*sorry*)
Message-ID: <21532@cbmvax.commodore.com>
Date: 13 May 91 22:36:19 GMT
References: <1991May13.011605.24289@crash.cts.com>
Reply-To: drysdale@cbmvax.commodore.com (Scott Drysdale)
Organization: Commodore, West Chester, PA
Lines: 32

In article <1991May13.011605.24289@crash.cts.com> uzun@pnet01.cts.com (Roger Uzun) writes:
>I know a lot of people ask this but:
>
>When one adds an AT bridgeboard to ones A3000, where can one put the
>5.25" drive?  I imagine it needs power, can I place it in my A1020 case
>(old 5.25" 360k drive for My amiga).

since there's no space in the 3000's case for a 5.25" disk, that sounds like
a reasonable thing to do.  be careful routing the ribbon cable so it doesn't
get pinched.  i'd try to convince your dealer to give you a nice 1.4M 3.5"
drive instead of the 5.25" drive.

>Also is there enough room to put an AT hardcard in the machine, or does
>the AT bridgeboard take up too much space?

there's room for a hardcard - if you don't have anything in the top (video)
slot.  see my previous post.

>-Roger
>
>UUCP: {hplabs!hp-sdd ucsd nosc}!crash!pnet01!uzun
>ARPA: crash!pnet01!uzun@nosc.mil
>INET: uzun@pnet01.cts.com

  --Scotty
-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Scott Drysdale           Software Engineer
Commodore Amiga Inc.     UUCP {allegra|burdvax|rutgers|ihnp4}!cbmvax!drysdale
		         PHONE - yes.
"Have you hugged your hog today?"
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=