Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!apple!agate!darkstar!ucscf.UCSC.EDU!davids
From: davids@ucscf.UCSC.EDU (Dave Schreiber)
Newsgroups: comp.sys.amiga.programmer
Subject: Re: I can't get Flood() to work!
Message-ID: <15681@darkstar.ucsc.edu>
Date: 12 May 91 04:27:03 GMT
References: <15629@darkstar.ucsc.edu> <3238@sirius.ucs.adelaide.edu.au>
Sender: usenet@darkstar.ucsc.edu
Organization: University of California, Santa Cruz
Lines: 21


In article <3238@sirius.ucs.adelaide.edu.au> jpotter@ucs.adelaide.edu.au (Jonathan Potter) writes:
>
>You need to allocate a TmpRas, and set the TmpRas pointer of the rastport to
>that. The TmpRas (presumably short for temporary rastport) is the same height
>and width as your window's rastport, but only one bit-plane deep. Check the RKM
>for more info, as I can't remember exactly how its done of the top of my head.

I tried your suggestion, and it Flood() still doesn't work (at least not
mode 1;  mode 0 works perfectly without a TmpRas).  

I can't find anything in the (1.1) RKMs, BTW, about using a TmpRas with
the Flood() command.  Is it in the 1.3 RKMs?

>| Jonathan Potter |                              | I'd really like to      |


-- 
Dave Schreiber                               E-mail:  davids@ucscf.ucsc.edu
"It was fun learning about logic, but I don't see where or when I will ever
use it again."                               Disclaimer: