Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!sdd.hp.com!wuarchive!uunet!nuchat!xcluud!cchen From: cchen@xcluud.sccsi.com (Conway Chen) Newsgroups: comp.sys.apple2 Subject: Re: AWGS, My HD, and my Datalink 2400 Message-ID: Date: 9 May 91 21:29:51 GMT References: Organization: Greater Montrose UFO Appreciation Society Lines: 30 whitewolf@gnh-starport.cts.com (Tae Song) writes: > |Hello. I'm having a bit of trouble with Appleworks IIGS initalizing > |my Datalinke 2400 Baud modem. I'm using version 1.1 of appleworks GS, > |installed on the first partion (/mine) of my 44 MB removable cartridge > |drive. I select my datalink 2400 to install under hardware, it 'thinks' > |for a sec or 2, then returns a "Unable to initalize modem" alert box. > |I'm using proterm on it right now..what's the prob? I have a few NDA's > |but nothing that I belive is causeing the trouble. > |Ed Moore > |TSEMM@alaska.bitnet > > Hmm, when did you start having the problem? Is it internal or external? Did > you get the right cable to connect it to the GS? How are you getting on here > if you can't use your modem? Do you have the thing is slot 2 and does your > software know it? If it's an internal do you have the slot set correctly? D > you have everything connected correctly? Have you figured out what's wrong > with it yet? > UUCP: crash!gnh-starport!whitewolf > ARPA: crash!gnh-starport!whitewolf@nosc.mil I've had the exact same problem lately, and before, it did work, but not since I last tried it. The Datalink 2400 is an internal. I hope you ca figure out what's wrong, I want to use the CM module for AWGS too :) -- Conway Chen cchen@xcluud.sccsi.com uunet!nuchat!xcluud!cchen