Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!hp-pcd!hpcvra.cv.hp.com!rnews!hpcvbbs!akcs.sun1
From: akcs.sun1@hpcvbbs.UUCP (william scott ferry)
Newsgroups: comp.sys.handhelds
Subject: Re: GATEWAY 2.7 codelock program
Message-ID: <282c9366:3053.1comp.sys.handhelds;1@hpcvbbs.UUCP>
Date: 12 May 91 01:40:05 GMT
References: <1991May8.114956.2809@etek.chalmers.se>
Lines: 20

Eric, first of all I really like your Gateway program and have 
used it since you posted the older version. And this new one really
takes care of that alarm problem nicely. 
I do have a WARNING however for any who try to put both GATEWAY 
and Jim Cloos' new library - _JimC (Comp.sys.handhelds item #3068)
into the calculator at the same time.  It's disasterous.
I o put them both on my 128K card I use for libraries, and as soon
as I turned the 48 off and then back on, the Gateway header came up, 
blinked a few times and then stayed on, with the attention annunciator
on. Nothing would clear it, turn the calc. on OR off, and it woudn't
go off by itself. ON-A-F didn't work, exept that I cleared all
my user memory.  The card (in port 2) was on 'Read Only' and was 
not effected.  
  I finally pulled the card with the machine still on and pulled
the battery.  Anyway after 6 more hours of doing all kinds of 
different things on both that machine and my other 48 (whose memory
was born to be dumped) I figured that the _JimC library was the
only one it woudn  wouldn't work with. Both machines are Version E.
  Thanks again for your great program. 
                                                Scott Ferry
                                                (415) 845-1088