Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!lll-winken!elroy.jpl.nasa.gov!usc!zaphod.mps.ohio-state.edu!think.com!mintaka!ogicse!pdxgate!eecs!johnh From: johnh@eecs.cs.pdx.edu (John Harris) Newsgroups: comp.sys.novell Subject: Re: Q-- Ethernet interface for HP Laserjet Message-ID: <2614@pdxgate.UUCP> Date: 10 May 91 19:57:32 GMT References: <2613@pdxgate.UUCP> Sender: news@pdxgate.UUCP Reply-To: johnh@eecs.UUCP (John Harris) Organization: Portland State University, Portland, OR Lines: 18 In article <2613@pdxgate.UUCP> johnh@eecs.UUCP (John Harris) writes: >>the need of a printer server. But I can't remeber where I saw the ad. > >The Intel NetPort will do this. It works great! I have several of them and > Opps! The Intel Netport still requires you to set it up using PCONSOLE. I'm not sure if it actually uses the Novell Print Server or what, but I don't have to have the Print Server VAP running. I have one HP Series III which still uses the Novell Remote Print Server Software. The last time the server went down (power outage) the Intel NetPorts came back up by themselves while the Novell Print Server did not. I was still able to use the NetPorts but not the other, until I interveined! John Harris johnh@eecs.ee.pdx.edu CAD LAB Supervisor Portland State University