Path: utzoo!utgpu!news-server.csri.toronto.edu!torsqnt!lsuc!canrem![stephen.feldman@canrem.uucp] From: "stephen feldman" Newsgroups: comp.windows.ms Subject: w3/atm/w4w problem Message-ID: <1991May10.1187.8233@canrem.uucp> Date: 10 May 91 15:45:22 EST Reply-To: "stephen feldman" Distribution: comp Organization: Canada Remote Systems I'm nearly at my wits end with this problem, and I'm hoping someone on the net can help... I've got W3.0 using ATM 1.0 and W4W 1.1 and finding that after loading W3 in 386 enh mode, ATM comes up ok, but when I load W4W the font list is completely empty. My printer is set for Postscript (Apple NTXII) and set for LPT1 (if set to FILE, all I see is the basic 35 postscript fonts). In my WIN.INI, I have a list of 230 softfonts under the PostScript,LPT1 header line, along with the basic postscript settings. ATM.INI is loaded with the same 230 softfonts (in the same order as the WIN.INI file) with its basic settings. Aside of the W4W problem of not seeing these fonts, here's the kicker... If I load Excel 3.0 or PowerPoint 1.0, both see all of the softfonts listed in the WIN.INI, but both claim that they can't find the postscript driver!! Any help would be greatly appreciated! Stephen PS. The system is a Toshiba T8500/25 (386 @ 25MHz, with a 200 Mg HDD) PPS. This system WAS working fine at one point, and I'm not sure what has changed to cause this problem. -- Canada Remote Systems. Toronto, Ontario NorthAmeriNet Host