Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!rex!rouge!lar From: lar@pc.usl.edu (Robert, Lane A.) Newsgroups: comp.dcom.modems Subject: Everex (was Re: T1000) Message-ID: Date: 14 May 91 15:02:56 GMT References: <42.282CCC07@zswamp.uucp> Sender: anon@rouge.usl.edu Reply-To: lar@usl.edu (Robert, Lane A.) Organization: Univ. of Southwestern LA, Lafayette Lines: 18 In-reply-to: peter@ficc.ferranti.com's message of 13 May 91 14:10:49 GMT In article peter@ficc.ferranti.com (Peter da Silva) writes: Well, I've had some problems with modems with MNP enabled, to the point where I generally don't turn it on. I've been typing away, for example, and all of a sudden the modem (an Everex) would lock up and quit talking. The TR light would be slowly blinking, and the only way out of this condition was to hang up and try again. The same thing happens to my 2 1/2 year old Everex 2400 every now and then, but in my case it's the MR light that blinks. I can still get its attention with +++, but the only command that will unwedge it is ATZ, which also drops the connection. Annoying. This has happened with and without MNP, so I suspect that you'll be seeing it again even if you never enable MNP. If anyone from Everex is out there and knows what is going on here, the information would be very much appreciated. Lane lar@usl.edu