Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!mp.cs.niu.edu!rickert From: rickert@mp.cs.niu.edu (Neil Rickert) Newsgroups: comp.mail.sendmail Subject: Re: MX, mail that gets stuck and deliver.c Message-ID: <1991May17.051344.6789@mp.cs.niu.edu> Date: 17 May 91 05:13:44 GMT References: <1991May16.231509.11210@mack.uit.no> Organization: Northern Illinois University Lines: 29 In article <1991May16.231509.11210@mack.uit.no> tage@staff.cs.uit.no (Tage Stabell-Kuloe) writes: >I've installed sendmail 5.65b on my HP-UX 7.05 system. Most of the >time it runs just fine, but from time to time the mail gets stuck. >When I re-run the queue (or sendmail does it) the mail is sent as usual. > >When the mail gets stuck, sendmail writes "Connecting to hostname >(mailer)", and then "stat=Deferred: Invalid argument". If I have (say) 30 >or 40 names in the address, the queue has to be run several times to get >the message sent to every adresee. Most likely this is when there is a networking problem. The next time that happens, try: telnet hostname 25 You will probably find that your telnet session often gets stuck too, after telnet says you are connected, but before you get the 'Hello' message from the remote sendmail. If this is happening occasionally, and most commonly when connecting to distant hosts, it is probably something you will just have to put up with. If it is happening frequently, and on nearby hosts, it may be time to check out your network and your gateway routers and the various telecommunication links. -- =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= Neil W. Rickert, Computer Science Northern Illinois Univ. DeKalb, IL 60115 +1-815-753-6940