Xref: utzoo comp.windows.ms:12680 comp.sys.ibm.pc.misc:9560 comp.databases:10057 comp.misc:12550
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!rutgers!cmcl2!adm!lhc!nih-csl!helix.nih.gov!gooey
From: gooey@helix.nih.gov (Sean Graham)
Newsgroups: comp.windows.ms,comp.sys.ibm.pc.misc,comp.databases,comp.misc
Subject: Re: help with i486.....
Message-ID: <1484@nih-csl.nih.gov>
Date: 14 May 91 13:47:23 GMT
References: <47413@muvms3.bitnet>
Sender: news@nih-csl.nih.gov
Followup-To: comp.windows.ms
Organization: National Institutes of Health, Bethesda
Lines: 21

In article <47413@muvms3.bitnet> smith@muvms3.bitnet (Phil smith) writes:
>I have a new 33mhz i486 machine that is driving me bananas! Here's 
>my problem(s):
>
>	1.  It will not run Dbase III+, nor will it even install Dbase
>	    IV!  Both installs are from original Diskettes, so there is

	I just got a 486/33 and had to switch to the lower speed to do
	some things.  My ALR does it with the CNTL-ALT-[+ or -] keys.


	Sorry, can't help with the rest as I'm not all that familiar
	with networks.  Good Luck.
	
	Sean

--
|| Sean N. Graham                 NIH                 BIX: sean.graham      ||
|| '91 GSX600FM | '85 RX-7    Bethesda, Md            gooey@helix.nih.gov   ||
||  "This is a test of the Emergency Broadcasting System.  This is just a   ||
||  test.  In the event of a real emergency you would most likely be dead." ||