Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!rpi!batcomputer!munnari.oz.au!metro!grivel!loki!rbennett
From: rbennett@loki.une.oz.au (Robert Bennetts)
Newsgroups: comp.music
Subject: Re: TRAKBLASTER hangs up at 20Mhz ?
Message-ID: <1515@loki.une.oz.au>
Date: 17 May 91 12:45:33 GMT
References: <1991May16.125227.65063@pttrnl.nl>
Organization: University of NewEngland, Northern Rivers (Lismore)
Lines: 16

prak1@pttrnl.nl writes:

>Can someone tell me wy TRAKBLASTER doesn't work on my 20Mhz AT ?

>When it starts to play, the computer hangs up after a few seconds.
>I have tried v1.4 and v2.0. and they both runs only in 12Mhz mode.
>My default Sound Blaster interrupt setting is int7 with port 220h.

	Does it play anything at all?
	I had similar problems when I first got TRAKBLASTER, until I figured out that you have to put everything in the configuration, including the 'h' on the nd of the port address even tho it doesn't say it.
	I have a 25 Mhz 386, and found TRAKBLASTER to be a bit slow with some complicated .MOD files, and have now changed to JMPLAYER.
	If you can get that, it would probably fix all your troubles.
	I hope I have been of some assistance.

	Ross.
		rbennett@loki.une.oz.au