Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!olivea!mintaka!bloom-beacon!eru!hagbard!sunic!mcsun!ukc!acorn!osmith
From: osmith@acorn.co.uk (Owen Smith)
Newsgroups: comp.sys.acorn
Subject: Re: Various Questions
Message-ID: <7108@acorn.co.uk>
Date: 15 May 91 14:06:52 GMT
References: <4427@stl.stc.co.uk>
Sender: osmith@acorn.co.uk
Distribution: comp
Organization: Acorn Computers Ltd, Cambridge, England
Lines: 17

In article <4427@stl.stc.co.uk> ajdh@stl.stc.co.uk (Andrew J D Hurley) writes:

>It would seem that 150dpi mode on my QuietJet gives
>about 210dpi in real life therefore makeing pages too small unless I
>compensate by drawing them bigger - this is not satisfactory as I also
>use a Citizen Swif24 which prints at the right size.

If you use Acorn's !PrinterLJ (release 1 or release 2) you can modify the
PrData file inside the application directory to add a 210 dpi entry. Best
way to do it is to block copy an existing entry and then change the
resolutions. Note that if you are using release 2, it is best to
edit the PrDataSrc file and then run the PrSquasher program to generate a
new PrData file.

Owen.

The views expressed are my own and are not necessarily those of Acorn.