Xref: utzoo comp.unix.sysv386:8161 comp.sys.ibm.pc.hardware:8788
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!elroy.jpl.nasa.gov!ncar!gatech!bloom-beacon!eru!hagbard!sunic!mcsun!hp4nl!tuegate.tue.nl!rc6.urc.tue.nl!rw7.urc.tue.nl!rcstack
From: rcstack@rw7.urc.tue.nl (Studenten Vereniging Stack)
Newsgroups: comp.unix.sysv386,comp.sys.ibm.pc.hardware
Subject: Info on ATronics ATI-486/B2 motherboard
Keywords: 486, ATronics, ATI-486/B2
Message-ID: <600@rc6.urc.tue.nl>
Date: 17 May 91 16:21:03 GMT
Sender: news@rc6.urc.tue.nl
Reply-To: rcstack@urc.tue.nl
Followup-To: comp.unix.sysv386
Organization: Eindhoven University of Technology, The Netherlands
Lines: 26


I'm looking for a 33Mhz 486 motherboard to replace my 25Mhz 386 board.  A
local dealer is offering an ATronics ATI-486/B2 board. The specs of this
board look really good. 

	- prepared for 33, 40 and 50Mhz 486
	- bus speed adjustable from Clk/6 to Clk/2
	- 256KB write back cache
	- support for burst mode

The dealer however could not tell me if an Adaptec 1542B SCSI host adapter
under Unix would work.

I would appreciate any information on this board, especially in combination
with the Adaptec SCSI adapter and Unix.

Thanks,

J.P. Smeets


-- 
=============================================================================
Email: Internet: rcstack@urc.tue.nl              Bitnet: rcstack1@heitue5
Computer Association STACK, Computing Centre RC 1.82,
Eindhoven University of Technology, POBox 513, 5600 MB Eindhoven, Holland.