Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!olivea!mintaka!bloom-beacon!eru!hagbard!sunic!news.funet.fi!funic!nntp.hut.fi!vipunen.hut.fi!mstr
From: mstr@vipunen.hut.fi (Markus Strand)
Newsgroups: comp.sys.ibm.pc.misc
Subject: Re: please tell me how to co-install RLL & MFM hard drives....PLEASE!
Message-ID: <1991May16.184504.11681@nntp.hut.fi>
Date: 16 May 91 18:45:04 GMT
References: <76334@eerie.acsu.Buffalo.EDU> <chchoi.910514223205@banana.eng.auburn.edu> <662@ariel.ucs.unimelb.edu.au>
Sender: usenet@nntp.hut.fi (Usenet pseudouser id)
Reply-To: mstr@vipunen.hut.fi (Markus Strand)
Organization: Helsinki University of Technology
Lines: 14
Nntp-Posting-Host: vipunen.hut.fi


>I have a type 2 - 20 Mb MFM hard drive installed (works fine)
>
>I received a 30 Mb RLL drive FREE!!! and want to use both

If you can install both controllers, MFM for the MFM drive and
RLL for the RLL drive, if you can change the I/O to do this.
 OR
Use the RLL drive with a MFM controller. You lose some diskspace
but you won't have any problems.


Markus Strand
mstr@vipunen.hut.fi