Xref: utzoo comp.protocols.tcp-ip:16128 comp.sys.novell:1565
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!cs.utexas.edu!ut-emx!rick
From: rick@ut-emx.uucp (Rick Watson)
Newsgroups: comp.protocols.tcp-ip,comp.sys.novell
Subject: Novell/IPX and packet drivers
Message-ID: <49099@ut-emx.uucp>
Date: 16 May 91 23:23:35 GMT
Followup-To: poster
Organization: The University of Texas at Austin; Austin, Texas
Lines: 13

I have a token ring attached PC that is a Novell/IPX client that I
would also like to run NCSA Telnet on.  There is already IP on the
token ring; I don't need to route IP to some other segment. 

I know this can be done with the IPXPKT packet driver, but this
requires another machine to unwrap the IP encapsulated in IPX
packet, right?  Will Novell/IPX use a token ring packet driver
so I can run both IPX and IP?

Rick Watson 
The University of Texas Computation Center, 512/471-3241
   internet: rick@akbar.cc.utexas.edu        bitnet: watson@utadnx
   uucp:     ...!cs.utexas.edu!ut-emx!rick   span:   utspan::utadnx::watson