Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!decwrl!fernwood!intuit!dd
From: dd@intuit.intuit.COM (David DelGreco)
Newsgroups: comp.sys.novell
Subject: Re: Printer doesn't show on Chooser
Message-ID: <437@intuit.intuit.COM>
Date: 16 May 91 20:27:19 GMT
Organization: Intuit Int., Menlo Park, CA
Lines: 13

Try MACSETUP.  You need to *publish* the the queues, then reboot the
server.  You're probably running low on memory.  It's been happening to us
for months.  We are almost done setting up a new server to deal with the
problem.  In FCONSOLE (s<enter>s<enter>), look at Dynamic Memory 1. On our
server the max is 18,000 something.  When the current goes over about 16,500
for any length of time, the Mac VAP seems to just melt right out of the
server.  First the print queues go, then Macs can't log into the network.
Later it will start affecting the PCs, but we usually catch it way before
then.

I could be wrong about your case, but this is what happened to us.

dd