Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!emory!gatech!usenet.ins.cwru.edu!eagle!data.nas.nasa.gov!amelia!serafini From: serafini@nas.nasa.gov (David B. Serafini) Newsgroups: comp.terminals Subject: Ann Arbor Ambassador question Message-ID: <1991May15.013431.578@nas.nasa.gov> Date: 15 May 91 01:34:31 GMT Sender: news@nas.nasa.gov Reply-To: serafini@amelia.nas.nasa.gov (David B. Serafini) Distribution: na Organization: NAS Program, NASA Ames Research Center, Moffett Field, CA Lines: 17 Can anyone tell me how to enable and/or program the function keys on an Ann Arbor Ambassador, 60 line terminal (old model, pre-XL)? Also, how about the making the numeric keypad generate ESC sequences rather than numbers? It sometimes will generate ANSI sequences for the arrow keys, but I haven't figured out what, besides the SETUP menu, can change this behavior. Obviously, I don't have the appropriate manual. Any help would be appreciated. Thanks. -David serafini@amelia.arc.nasa.gov -- David B. Serafini serafini@ralph.arc.nasa.gov Rose Engineering and Research or ...!ames!amelia!serafini NASA/Ames Research Center MS227-6 (415)604-6233 Moffett Field, CA 94035 #include