Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!elroy.jpl.nasa.gov!decwrl!pa.dec.com!shodha.enet.dec.com!alan From: alan@shodha.enet.dec.com ( Alan's Home for Wayward Notes File.) Newsgroups: comp.unix.ultrix Subject: Re: swap area size on DECstation 2100 ? Summary: Don't bother. Message-ID: <3166@shodha.enet.dec.com> Date: 17 May 91 19:11:53 GMT References: <75998@brunix.UUCP> Organization: Digital Equipment Corp. - Colorado Springs, CO. Lines: 43 In article <75998@brunix.UUCP>, lr@cs.brown.edu (Luigi Rizzo) writes: > Thanks to all who responded to my previous posting on the double login bug. > > I'm now looking to modify disk partitioning on our 2 DS2100 machines, > which have a 330MB disk each (RZ55). The standard installation > procedure allocates about 65MB of swap space, which is very large compared > to the disk size. Our applications for sure do not require so much > memory, but I have little experience on how memory-consuming can be > standard Xwindows applications (xterm, xdvi) and Ultrix compilers. > Any advise ? Here are the current partitions. [ remainder deleted. ] You could: 1. Backup /usr. 2. Repartition to make B smaller and and G take over the new space. 3. Create a new file system on G. 4. Restore /usr. But I don't think it would be worth it. If you find that that one extra application isn't running because of an "out of core" message, then clearly you need more page/ swap space. You're at a point that you may need more disk space anyway. The thing that tend to do is add an RZ23 or RZ24 to the system. They don't take up anymore disk space since they fit inside the DECstation cabinet. To get more space on the root file system I usually move /genvmunix somewhere else. Don't outright delete it, you might need it someday, but it doesn't need to permanently reside on the root file system. If you have space in /usr I recommend: /sys/MIPS/GENERIC. > > Thanks > Luigi You're welcome. -- Alan Rollow alan@nabeth.cxn.dec.com