Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!caen!news.cs.indiana.edu!uceng!cccbbs!dpavey
From: dpavey@cccbbs.UUCP (doug pavey)
Newsgroups: comp.dcom.modems
Subject: Re: Kermit, TELIX HELP !!!
Message-ID: <14F024w164w@cccbbs.UUCP>
Date: 20 May 91 19:31:59 GMT
References: <63.2833558C@zswamp.uucp>
Organization: Cincinnati Computer Connection
Lines: 40

root@zswamp.uucp (Geoffrey Welsh) writes:

> In a letter to All, doug pavey (dpavey@cccbbs.UUCP ) wrote:
> 
>  >I also am looking for a termcap definition for TELIX 3.15 
>  >that will
>  >support VI in ansi-bbs mode (screen does not update 
>  >properly).
> 
>    I've had reasonable luck using Telix 3.15 and TERM=vt102 with AT&T Unix 
> SysV r3.1.1 and r3.2 on 3B2, SCO Xenix 2.3.2, SCO Unix 3.2 v1 & v2, SunOS 4.0
> and other systems... at least well enough to run vi.  It has even run EDT 
> under VAX VMS (sorry, version number eludes me at the moment).
> 
>    The long term solution would be for me to port Per Lindberg's VT-100 test 
> suite to MS-DOS and give Colin a copy.  I've been promising to do so for 
> ages...

thanks, but I also need access to at least 10 function keys for my
emulation to function properly.  I can get ansi mode to come real close,
but when in ansi mode, VI will erase charaters when moving past them &
other characters at the end of lines etc.

I am using SCO UNIX and SCO XENIX (joined together in a TCP-IP network)
depending upon which machine I need to work on.  Both have the same
problems with TELIX.

I have been forced to use the James River ICE.TEN package when editing
which is a hassle, switching back and forth (ICE.TEN [or dejavu] does
not have and file transfer software built-in).

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Douglas A. Pavey
Programmer/Analyst
Syncor International
+1 513/984-2839 9-5 EDT
dpavey@cccbbs.UUCP

This is not an official document of Syncor International.  
This work is the sole responsibility of the author and has not been