Xref: utzoo biz.comp.telebit:80 comp.dcom.modems:9876
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!wuarchive!uunet!osh3!chip
From: chip@osh3.OSHA.GOV (Chip Yamasaki)
Newsgroups: biz.comp.telebit,comp.dcom.modems
Subject: Re: Can you change the pulse timing on T2500's?
Message-ID: <1991May21.044113.1688@osh3.OSHA.GOV>
Date: 21 May 91 04:41:13 GMT
References: <1991May20.153657.654@shaman.com>
Organization: U.S. D.O.L - Occupational Safety & Health Admin.
Lines: 18

In <1991May20.153657.654@shaman.com> jiro@shaman.com (Jiro Nakamura) writes:

>Hiya -
>	Quick question:

>	Is it possible to change the speed of the pulse dialing on
>Telebit T2500's?  I haven't counted, but it seems like it's about
>15 pps, I'd like to move it up to 20 pps if possible.

Check the manual, pp 4-32 and 5-38 both list S Register 11 which sets the
Touch tone timing.  There the manual says "The S11 register does NOT
affect pulse dialing which IS FIXED at 100 milliseconds per pulse."

No, you can't change it.
-- 
--
Charles "Chip" Yamasaki
chip@oshcomm.osha.gov