Xref: utzoo biz.comp.telebit:81 comp.dcom.modems:9887 Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!sun-barr!ccut!wnoc-tyo-news!astemgw!kuis!aegis!davidg From: davidg%aegis.or.jp@kyoto-u.ac.jp (Dave McLane) Newsgroups: biz.comp.telebit,comp.dcom.modems Subject: Re: Can you change the pulse timing on T2500's? Message-ID: Date: 21 May 91 21:25:46 GMT References: <1991May21.044113.1688@osh3.OSHA.GOV> Organization: Aegis Society Lines: 29 chip@osh3.OSHA.GOV (Chip Yamasaki) writes: > In <1991May20.153657.654@shaman.com> jiro@shaman.com (Jiro Nakamura) writes: > > >Hiya - > > Quick question: > > > Is it possible to change the speed of the pulse dialing on > >Telebit T2500's? I haven't counted, but it seems like it's about > >15 pps, I'd like to move it up to 20 pps if possible. > > Check the manual, pp 4-32 and 5-38 both list S Register 11 which sets the > Touch tone timing. There the manual says "The S11 register does NOT > affect pulse dialing which IS FIXED at 100 milliseconds per pulse." True enough, but my manual says, on pp 4-23 and 5-30: The &P command is used to select the make/break ratio used when pulse dialing. &P0 - 39% Make/61% Break ratio. US timing. &P1 - 33% Make/67% Break ratio. UK timing. But maybe that isn't what you want.... --Dave -- Dave McLane